Professional testing equipment and reports to ensure product quality.
Analog Devices Inc. RFQ AVAILABLE

LT3093HDD#TRPBF

IC REG LIN NEG ADJ 200MA 12DFN

Part Number
LT3093HDD#TRPBF
Manufacturer
Analog Devices Inc.
Category
Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
Package
12-WFDFN Exposed Pad
Datasheet:
LT3093HDD#TRPBF.pdf
Description
IC REG LIN NEG ADJ 200MA 12DFN
Select Quantity Stock: 13,158
FAST RESPONSE

Quick RFQ

Send your requirements and our sales team will contact you as soon as possible.

Part Number
Quantity *
Target Price
Name *
Company *
Email *
Comments
PRODUCT INFORMATION

Product Details

PRODUCT TECHNICAL REFERENCE

LT3093HDD#TRPBF –20V, 200mA, Ultralow Noise, Ultrahigh PSRR Negative Linear Regulator

A comprehensive technical overview of the LT3093HDD#TRPBF, an H-Grade high-performance negative low-dropout linear regulator from Analog Devices featuring a –1.8V to –20V input range, 0V to –19.5V adjustable output, 200mA output current, 0.8µVRMS ultralow RMS noise, 2.2nV/√Hz spot noise, 73dB PSRR at 1MHz, a VIOC tracking function, and a 12-lead 3mm × 3mm DFN package. The H-Grade version is specified for operation from –40°C to +150°C junction temperature. Covers device function, core features, electrical specifications, pin configuration, typical applications, and replacement selection guidance.

Analog Devices 12-Lead DFN (3mm × 3mm w/ EP) –1.8V to –20V
Device Classification Negative Ultralow Noise LDO Voltage Regulator
Part Number
LT3093HDD#TRPBF
Mounting Type
Surface Mount
Operating Temperature Range
-40°C to +150°C (TJ)
01
PRODUCT OVERVIEW

What Is the LT3093HDD#TRPBF?

LT3093HDD#TRPBF is an H-Grade high-performance negative low-dropout linear regulator from Analog Devices (Linear Technology) featuring the company's ultralow noise and ultrahigh PSRR architecture for powering noise-sensitive applications. The device supplies 200mA at a typical dropout voltage of 190mV, and can be easily paralleled to further reduce noise, increase output current, and spread heat on the PCB.

Operating quiescent current is nominally 2.35mA and drops to 3µA in shutdown. The LT3093's wide output voltage range of 0V to –19.5V, while maintaining unity-gain operation, provides virtually constant output noise, PSRR, bandwidth, and load regulation independent of the programmed output voltage. A single capacitor from SET to GND improves noise, PSRR, and transient response.

The regulator features a single-resistor programmable output voltage with a precision 100µA SET pin current (±1% initial accuracy), programmable current limit, fast start-up capability via the PGFB pin, and a programmable power-good indicator. A unique VIOC tracking function controls an upstream regulator to maintain a constant voltage across the LT3093, maximizing efficiency and PSRR while minimizing power dissipation. Built-in protection includes internal current limit with foldback and thermal limit with hysteresis.

The LT3093HDD#TRPBF is the H-Grade version in a thermally enhanced 12-lead 3mm × 3mm DFN package with an exposed pad. It is specified for operation from –40°C to +150°C junction temperature. The device is RoHS compliant, REACH unaffected, and in active production.

Ultralow Noise (–0.8µVRMS) 0.8µVRMS output noise (10Hz–100kHz) and 2.2nV/√Hz spot noise at 10kHz make this LDO ideal for powering noise-sensitive RF and precision analog circuits.
Ultrahigh PSRR & VIOC Tracking 73dB PSRR at 1MHz with virtually constant performance. The VIOC pin controls an upstream regulator to maintain constant voltage across the LT3093, optimizing efficiency and PSRR.
Wide Negative Input & Adjustable Output –1.8V to –20V input, 0V to –19.5V adjustable output with 200mA output current and 190mV typical dropout voltage. H-Grade specified for –40°C to +150°C.
02
DEVICE HIGHLIGHTS

Key Features and Benefits of LT3093HDD#TRPBF

Ultralow Noise (0.8µVRMS)

0.8µVRMS output noise (10Hz–100kHz) and 2.2nV/√Hz spot noise at 10kHz make this LDO ideal for powering noise-sensitive loads such as PLLs, VCOs, mixers, and LNAs.

Ultrahigh PSRR (73dB at 1MHz)

73dB PSRR at 1MHz with virtually constant performance across the entire output voltage range, delivering excellent ripple rejection for demanding RF and instrumentation applications.

Wide Negative Input & Adjustable Output

Operates from –1.8V to –20V input with an adjustable output from 0V to –19.5V, accommodating a broad spectrum of negative rail applications.

200mA Output with Low Dropout

Delivers 200mA output current with a typical 190mV dropout voltage, providing high efficiency in low-headroom negative rail designs.

VIOC Tracking Function

The VIOC pin controls an upstream regulator to maintain a constant voltage across the LT3093, maximizing efficiency and PSRR while minimizing power dissipation.

Compact 12-Lead DFN Package

Available in a thermally enhanced 12-lead 3mm × 3mm DFN package with an exposed pad, ideal for space-constrained designs. H-Grade specified for –40°C to +150°C.

03
REFERENCE DATA

Technical Specifications for LT3093HDD#TRPBF

Part Number LT3093HDD#TRPBF Manufacturer Analog Devices
Device Type Negative Ultralow Noise LDO Voltage Regulator Output Configuration Negative, Adjustable
Input Voltage Range (VIN) –1.8V to –20V Output Voltage Range (VOUT) 0V to –19.5V (Adjustable)
Output Current (Max) 200mA Dropout Voltage (Typical) 190mV @ 200mA
Output Noise (RMS) 0.8µVRMS (10Hz–100kHz) Output Noise (Spot) 2.2nV/√Hz at 10kHz
PSRR (1MHz) 73dB Quiescent Current (IQ) 2.35mA (Nominal)
Shutdown Current 3µA SET Pin Current 100µA ±1% Initial Accuracy
Minimum Output Capacitor 4.7µF Ceramic Protection Features Internal Current Limit with Foldback, Thermal Limit with Hysteresis
Control Features Programmable Current Limit, Fast Start-Up, Programmable Power Good, Bipolar Enable/UVLO, VIOC Tracking Package / Case 12-Lead DFN (3mm × 3mm w/ EP)
Supplier Device Package 12-DFN (3x3) Pin Count 12 (Plus Exposed Pad Pin 13)
Mounting Type Surface Mount Operating Junction Temperature (H-Grade) -40°C to +150°C
Thermal Resistance (θJA) 34°C/W Thermal Resistance (θJC) 5.5°C/W
RoHS ROHS3 Compliant REACH Status REACH Unaffected
MSL Level MSL 1 (Unlimited) Product Status Active
Packaging Tape & Reel (2,500 per Reel) Grade H-Grade

Electrical values shown above are reference values. Test conditions, limits, and guaranteed performance should always be confirmed from the current official manufacturer datasheet before design or production use.

04
DESIGN REFERENCE

Circuit Considerations for LT3093HDD#TRPBF

Output Voltage & Current Limit Programming

The LT3093HDD#TRPBF offers flexible output and current limit configuration:

  • Output Voltage (SET Pin): A resistor from SET to GND programs the output voltage. The SET pin sinks a precision 100µA current, so VOUT = –(100µA × RSET). Output voltage range is 0V to –19.5V.
  • Noise & PSRR Improvement: Adding a capacitor from SET to GND improves noise, PSRR, and transient response. Use a low-leakage capacitor to avoid DC errors.
  • Programmable Current Limit (ILIM Pin): A resistor from ILIM to GND sets the current limit (scale factor nominally 1.95A·kΩ). Kelvin connect this resistor directly to the GND pin for best accuracy.
  • Fast Start-Up (PGFB Pin): The PGFB pin activates fast start-up circuitry. If fast start-up is not needed, tie PGFB to IN. This allows the use of large SET pin capacitors without long start-up times.
  • VIOC Tracking (VIOC Pin): The VIOC pin controls an upstream regulator to maintain a constant differential voltage across the LT3093, optimizing efficiency and PSRR. Float if unused.

PCB and System-Level Guidance

Negative LDO regulator performance depends on layout and component selection:

  • Input Capacitor: A 4.7µF input bypass capacitor from IN to GND generally suffices. Applications with large load transients may require higher input capacitance.
  • Output Capacitor: Stable with a minimum 4.7µF ceramic output capacitor.
  • Exposed Pad: The exposed pad (Pin 13) is IN and must be soldered to the PCB. The DFN package has a thermal resistance (θJA) of 34°C/W and (θJC) of 5.5°C/W.
  • Kelvin Sense (OUTS Pin): Connect the OUTS pin directly to the output capacitor for optimal transient performance and load regulation.
  • EN/UV Pin: The EN/UV pin is bidirectional and can be switched with either a positive or negative voltage. Do not float. If unused, tie EN/UV to IN. The turn-on threshold is approximately ±1.26V.
  • Verify the recommended PCB footprint from the official datasheet prior to production.
05
12-LEAD DFN (3mm × 3mm w/ EP)

Pin Configuration Reference for LT3093HDD#TRPBF

LT3093
DFN TOP VIEW

Confirm package orientation and pin numbering against the official package drawing before PCB layout. The DFN package has 12 pins with a 3.00mm × 3.00mm body size and an exposed pad (Pin 13). The exposed pad is IN and must be soldered to the PCB for optimal thermal and electrical performance.

1 IN Input Supply - –1.8V to –20V; Bypass with ≥4.7µF Ceramic Capacitor to GND
2 IN Input Supply - –1.8V to –20V
3 EN/UV Enable/UVLO - Bidirectional; High = On; Programmable UVLO via Resistor Divider; Do Not Float
4 PG Power Good - Open-Collector Output; Low When PGFB < –300mV; Leave Floating if Unused
5 PGFB Power Good Feedback - Programmable Threshold; Activates Fast Start-Up; Tie to IN if Unused
6 ILIM Current Limit - Resistor to GND Sets Maximum Output Current (Nominal 1.95A·kΩ); Tie to GND if Unused
7 VIOC Voltage for Input-to-Output Control - Controls Upstream Regulator to Maintain Constant Differential; Float if Unused
8 SET Output Voltage Set - Resistor to GND Programs Output Voltage; 100µA Precision Current Sink
9 GND Ground - Connect to PCB Ground Plane
10 OUTS Output Sense - Kelvin Connect to Output Capacitor for Optimal Regulation
11 OUT Regulated Negative Output - Connect to Load and Output Capacitor
12 OUT Regulated Negative Output - Connect to Load and Output Capacitor
13 EP Exposed Pad - IN; Must Be Soldered to PCB for Thermal and Electrical Performance
06
APPLICATION AREAS

Typical Applications for LT3093HDD#TRPBF

RF & Precision Power Supplies

Ultralow noise and ultrahigh PSRR make this LDO ideal for powering noise-sensitive RF circuits, PLLs, VCOs, mixers, and LNAs.

High-Speed/High-Precision Data Converters

Provides clean negative power rails for high-resolution ADCs and DACs, maintaining signal integrity in precision measurement systems.

Medical Applications (Diagnostics & Imaging)

Low-noise performance suitable for medical diagnostic and imaging equipment requiring clean negative analog supplies.

Very Low Noise Instrumentation

Test and measurement equipment, data acquisition systems, and analytical instruments benefit from the device's ultralow noise characteristics.

Post-Regulator for Switching Supplies

Provides clean, low-noise post-regulation for switching power supplies in noise-sensitive applications.

Automotive & High-Temperature

H-Grade specified for –40°C to +150°C junction temperature, suitable for automotive and harsh-environment negative rail power supplies.

07
REPLACEMENT GUIDANCE

Selecting an Alternative for LT3093HDD#TRPBF

A replacement for the LT3093HDD#TRPBF should not be selected solely by product category. The electrical characteristics, package, and pin configuration must be evaluated against the specific circuit requirements. The following alternatives are documented in the official Analog Devices product pages and datasheets.

Output current: 200mA
Input voltage range: –1.8V to –20V
Output voltage range: 0V to –19.5V
Output noise: 0.8µVRMS
PSRR: 73dB at 1MHz
Package: 12-Lead DFN (3mm × 3mm)
Temperature range: –40°C to 150°C (H-Grade)
VIOC tracking function

Family alternatives (same package, different grade or packaging):

Part Number Package Temperature Grade Packaging
LT3093HDD#TRPBF 12-DFN (3mm × 3mm) H-Grade (–40°C to 150°C) Tape & Reel
LT3093HDD#PBF 12-DFN (3mm × 3mm) H-Grade (–40°C to 150°C) Tube
LT3093EDD#TRPBF 12-DFN (3mm × 3mm) E-Grade (–40°C to 125°C) Tape & Reel
LT3093IDD#TRPBF 12-DFN (3mm × 3mm) I-Grade (–40°C to 125°C) Tape & Reel

All alternative part numbers listed above are documented in the official Analog Devices product pages and datasheets. The LT3093HDD#TRPBF is the H-Grade (–40°C to 150°C) version in a 12-DFN package with tape-and-reel packaging (2,500 units per reel). For tube packaging in the same grade, consider LT3093HDD#PBF. For E-Grade or I-Grade operation in the same package, consider LT3093EDD#TRPBF or LT3093IDD#TRPBF. For the MSOP package option, consider LT3093HMSE#TRPBF (H-Grade) or other MSOP grades. For higher output current, consider LT3094 (500mA) or LT3090 (600mA). Select based on temperature grade, package, current requirement, and feature set.

Alternative Part Support

Send the original part number, application, required quantity, and key parameters to Haishengye Electronics for replacement-part sourcing support.

Ask About Alternatives
MANUFACTURER INFORMATION

Analog Devices

The LT3093 (LT3093HDD#TRPBF) belongs to the LT3093 family of –20V, 200mA ultralow noise, ultrahigh PSRR negative linear regulators from Analog Devices. The device features Linear Technology's ultralow noise and ultrahigh PSRR architecture for powering noise-sensitive applications. Designed with a precision current reference and a high-performance voltage buffer, the LT3093 can be easily paralleled to further reduce noise, increase output current, and spread heat on the PCB. The LT3093 family is recommended for new designs and is widely used in RF and precision power supplies, very low noise instrumentation, high-speed/high-precision data converters, medical diagnostics and imaging, and post-regulation for switching supplies. The H-Grade version is specified for –40°C to +150°C junction temperature and is available in thermally enhanced 12-lead MSOP and 3mm × 3mm DFN packages.

SUPPLIED BY

Haishengye Electronics

Haishengye Electronics provides electronic component stock supply, BOM sourcing, quotation support, and quality inspection services for LT3093HDD#TRPBF and related devices.

Submit Your Requirements
Technical Information Disclaimer

This technical guide is provided for product identification and preliminary reference only. Electrical limits, package dimensions, pin configuration, product status, and application suitability must be verified using current official manufacturer documentation before design, procurement, or production.

TECHNICAL RESOURCES

LT3093HDD#TRPBF Technical Information

  • Specifications
  • FAQ
  • Hot Sale
  • Packaging
  • Related Products

Specifications

Product Attribute
Attribute Value
Part Number
LT3093HDD#TRPBF
Manufacturer
Analog Devices Inc.
Package
12-WFDFN Exposed Pad
Series
-
Package/Case
12-WFDFN Exposed Pad
Packaging
Tape & Reel (TR)
Product Status
Active
Output Configuration
Negative
Output Type
Adjustable
Number of Regulators
1
Voltage - Input (Max)
-20V
Voltage - Output (Min/Fixed)
0V
Voltage - Output (Max)
-19.5V
Voltage Dropout (Max)
0.3V @ 200mA
Current - Output
200mA
Current - Quiescent (Iq)
10 µA
Current - Supply (Max)
80 mA
PSRR
73dB (1MHz)
Control Features
Current Limit, Enable
Protection Features
Over Current, Over Temperature, Short Circuit
Operating Temperature
-40°C ~ 150°C (TA)
Grade
-
Qualification
-
Mounting Type
Surface Mount
Supplier Device Package
12-DFN (3x3)

Frequently Asked Questions

1. How can I order LT3093HDD#TRPBF from Haishengye Electronics?

Submit an RFQ directly on this page with your required quantity, target price and delivery requirements. Our sales team will review the request and provide a quotation.

2. How does Haishengye Electronics verify the quality of LT3093HDD#TRPBF?

We work with qualified suppliers and review sourcing channels, traceability, packaging and product condition before shipment.

3. Are the stock and price of LT3093HDD#TRPBF updated in real time?

Electronic component inventory and prices may change frequently. Displayed values are references, and final stock and pricing will be confirmed in the quotation.

4. Which payment methods are supported?

Wire Transfer, PayPal, Alipay, WeChat, Credit Card, Western Union, MoneyGram and Escrow may be supported depending on the order and destination.

5. How is international shipping arranged?

International shipping may be arranged through DHL, UPS, FedEx, TNT and other logistics channels. Tracking information will be provided after shipment.

6. What is the return or replacement process for LT3093HDD#TRPBF?

Contact our sales team within the agreed period if there are quantity differences, incorrect items or clear external defects. Products should remain unused and in their original packaging.

7. Can I request technical support for LT3093HDD#TRPBF?

Yes. Contact our team for datasheets, package details, product specifications, alternative parts and sourcing assistance.

Packaging and Shipping Protection

Step 1 product inspection
Step 1 Product Inspection
Step 2 casing and dry pipe protection
Step 2 Casing & Dry Pipe
Step 3 anti-static bag packaging
Step 3 Anti-static Bags
Step 4 inner carton packaging
Step 4 Inner Carton
Step 5 shipping label
Step 5 Shipping Label
Step 6 international delivery
Step 6 International Delivery

Packaging may be adjusted according to product type, quantity, moisture sensitivity and destination requirements.

Related Products

MIC5504-1.8YM5-TR Microchip Technology
MIC5504-1.8YM5-TR

Microchip Technology

MIC5504-3.3YM5-TR Microchip Technology
MIC5504-3.3YM5-TR

Microchip Technology

MIC5365-3.0YC5-TR Microchip Technology
MIC5365-3.0YC5-TR

Microchip Technology

MIC5365-1.8YC5-TR Microchip Technology
MIC5365-1.8YC5-TR

Microchip Technology

MIC5365-2.5YC5-TR Microchip Technology
MIC5365-2.5YC5-TR

Microchip Technology

MIC5365-3.3YC5-TR Microchip Technology
MIC5365-3.3YC5-TR

Microchip Technology

MIC5365-3.3YD5-TR Microchip Technology
MIC5365-3.3YD5-TR

Microchip Technology

MIC5317-3.3YM5-TR Microchip Technology
MIC5317-3.3YM5-TR

Microchip Technology

TLV1117LV33DCYR Texas Instruments
TLV1117LV33DCYR

Texas Instruments

MIC5317-3.3YMT-TZ Microchip Technology
MIC5317-3.3YMT-TZ

Microchip Technology

MIC5528-3.3YMT-TR Microchip Technology
MIC5528-3.3YMT-TR

Microchip Technology

TLV75801PDRVR Texas Instruments
TLV75801PDRVR

Texas Instruments

SOURCING SUPPORT

LT3093HDD#TRPBF Procurement and Technical Support

LT3093HDD#TRPBF is manufactured by Analog Devices Inc.. This page provides purchasing information including manufacturer, category, package, datasheet, stock reference, price reference and product specifications.

Haishengye Electronics supports customers sourcing LT3093HDD#TRPBF and related electronic components for prototype development, maintenance, NPI, production preparation and one-stop BOM procurement.

Submit an RFQ to request the latest stock, price, lead time, batch information, alternative parts, package confirmation or technical documents for LT3093HDD#TRPBF.

Part Number
LT3093HDD#TRPBF
Manufacturer
Analog Devices Inc.
Package
12-WFDFN Exposed Pad
Category
Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
Submitting...
Please wait while we submit your inquiry.

Tips

Please check your information and try again.